Pogo Pin Characteristics
Common structure of pogo pin
Pogo pin contact principle
Characteristics
- Long service time, 10,000 times
- No tooling fee,easy go customize
- Adjustable and measurable spring force
- Fine pitch
- Flexible manufacturing ways: SMT,plug-in...
- Save space: help mechanical engineer easily allocatecomponents on PCB
- Good performance on RF solution
- RoHS and Halogen Free
Common internal structure of Pogo Pin
| Structure | Ball beads structure | Sloping structure | Perforated structure | Claw structure |
| Contact impedance | ≤ 10mΩ | ≤ 30mΩ | ≤ 50mΩ | ≤ 5mΩ |
| Long service time | 10000+ | 10000+ | 10000+ | 500+ |
| Recommended working current | 10A max | 10A max | 10A max | 10A max |
| Contact stability | ★ ★ ★ ★ ☆ | ★ ★ ★ ☆ ☆ | ★ ★ ★ ☆ ☆ | ★ ★ ★ ★ ★ |
| Processing cost | ★ ★ ★ ☆ ☆ | ★ ★ ☆ ☆ ☆ | ★ ★ ☆ ☆ ☆ | ★ ★ ★ ★ ☆ |
| Main application areas | Mainly used for charging and condition with certain requirements for vibration and shock | Mainly used for charging or signal transmission of Consumer electronics | Mainly used for signal transmission or grounding antenna,etc. | Mainly used high-frequency,anti-instantaneous,the situation which high-reliability is required,such as base stations,military industries,vehicles. |
| Remarks | The beads increase the internal contacts,the contact is more stable,and the more needle space is required | The most commonly used structure on the market | The space is smaller,but the contact is not stable,the current is easy to run through the spring,and it is not recommended for charging | The needle and the needle tube have multiple contacts to increase the contact stability |
Product Model
| Index | | L | W | H | Pitch | Cap | Positioner | A | B | C | D | Working height | Froce(gf) | PDF |
|---|
| Index | | L | W | H | Pitch | Cap | Positioner | A | B | C | D | Working height | Froce(gf) | PDF |
|---|
| 1 | 100539-5 | 10.5 | 2.5 | 1.5 | 2 | Y | N | 1.65 | 0.4 | 2.2 | 3 | 2.5 | 90 Min | |
| 2 | 100029-5 | 10.5 | 2.5 | 1.5 | 2 | Y | N | 1.65 | 0.6 | 2.4 | 3.2 | 2.7 | 70 Min | |
| 3 | 100281-5 | 10.5 | 2.5 | 1.5 | 2 | Y | N | 1.65 | 0.8 | 3.3 | 4.6 | 3.6 | 100+60/-20 | |
| 4 | 100326-5 | 10.5 | 2.5 | 1.5 | 2 | Y | N | 1.65 | 0.7 | 3.7 | 5.2 | 4.2 | 135±30 | |
| 5 | 100343-5 | 10.5 | 2.5 | 1.5 | 2 | Y | N | 1.65 | 0.5 | 3.7 | 5.5 | 4.3 | 180±30 | |
| 6 | 100698-5 | 10.5 | 2.5 | 1.5 | 2 | Y | N | 1.65 | 0.7 | 3.7 | 5.5 | 4.5 | 50±10 | |
| 7 | 100745-5 | 12.66 | 2.5 | 2 | 2.54 | Y | N | 2 | 0.4 | 3.5 | 3.3 | 2.7 | 100±30 | |
| 8 | 100910-5 | 12.66 | 2.5 | 2 | 2.54 | N | N | 2 | 0.4 | 2.7 | 3.8 | 3 | 80±30 | |
| 9 | 1001098-5 | 12.66 | 2.5 | 2 | 2.54 | Y | N | 2 | 0.5 | 3 | 4 | 3.5 | 80 Min | |
| 10 | 10110051221 | 12.66 | 2.5 | 2 | 2.54 | N | N | 2 | 0.5 | 3 | 4.5 | 3.9 | 80 Min | |
| 11 | 100339-5 | 12.66 | 2.5 | 2 | 2.54 | Y | N | 2 | 0.5 | 3.5 | 5 | 4.2 | 45±12 | |
| 12 | 100700-5 | 12.66 | 2.5 | 2 | 2.54 | N | N | 2 | 0.5 | 4 | 5.5 | 4.5 | 75±25 | |
| 13 | 1001099-5 | 12.66 | 2.5 | 2 | 2.54 | Y | N | 2 | 0.5 | 4.5 | 6.5 | 5.5 | 80 Min | |
| 14 | 110728-5 | 12.66 | 2.5 | 2 | 2.54 | N | N | 2 | 1 | 5 | 7 | 6 | 110±30 | |
| 15 | 110911-5 | 12.66 | 2.5 | 2 | 2.54 | N | N | 1.8 | 3 | 8 | 10.8 | 9.8 | 120 Min | |
| 16 | 10101051197 | 12.76 | 2.5 | 2 | 2.54 | Y | N | 1.8 | 0.5 | 3.3 | 4.5 | 3.5 | 90±20 | |
| 17 | 10101051300 | 12.66 | 2.5 | 2 | 2.54 | Y | N | 2 | 0.25 | 2.2 | 3 | 2.5 | 95 Min | |
| 18 | 10110051353 | 12.66 | 2.5 | 2 | 2.54 | Y | N | 2 | 0.5 | 3 | 4 | 3.5 | 80 Min | |
| 19 | 10101051230 | 12.66 | 2.5 | 2 | 2.54 | Y | N | 2 | 0.5 | 3 | 4 | 3.5 | 80 Min | |
| 20 | 10101051227 | 12.66 | 2.5 | 2 | 2.54 | Y | N | 2 | 0.5 | 4.5 | 6.5 | 5.5 | 80 Min | |
| Index | | L | W | H | Pitch | Cap | Positioner | A | B | C | D | E | F | Working height | Froce(gf) | PDF |
|---|
| Index | | L | W | H | Pitch | Cap | Positioner | A | B | C | D | E | F | Working height | Froce(gf) | PDF |
|---|
| 1 | 110955-5 | 12.66 | 2.5 | 2 | 2.54 | N | N | 1 | 1 | 2 | 0.5 | 3.5 | 5 | 3.8 | 150±35 | |
| 2 | 110744-5 | 12.66 | 2.5 | 2 | 2.54 | N | N | 0.9 | 2 | 2 | 0.5 | 3 | 4.5 | 3.9 | 90±20 | |
| 3 | 10110051167 | 12.66 | 2.5 | 2 | 2.54 | N | N | 0.9 | 2 | 2 | 0.5 | 3.8 | 5.3 | 4.15 | 110±35 | |
| 4 | 110947-5 | 12.66 | 2.5 | 2 | 2.54 | N | N | 0.8 | 2 | 2 | 0.5 | 4.5 | 6 | 5.2 | 80 Min | |
| 5 | 110763-5 | 12.66 | 2.5 | 2 | 2.54 | N | N | 1 | 1 | 2 | 1.9 | 6.5 | 8.5 | 7.1 | 115±30 | |
| 6 | 110165-5 | 12.66 | 2.5 | 2 | 2.54 | N | N | 0.8 | 0.7 | 1.8 | 0.3 | 8.5 | 11.3 | 10.5 | 55±15 | |
| 7 | 110639-5 | 12.66 | 2.5 | 2 | 2.54 | N | N | 1 | 1 | 1.8 | 0.5 | 9.9 | 12.4 | 11.4 | 60±25 | |
| 8 | 10110051394 | 12.66 | 2.5 | 2 | 2.54 | N | N | 1 | 2.5 | 2 | 0.8 | 5.5 | 7.5 | 6.6 | 80 min | |
| 9 | 10110051356 | 12.66 | 2.5 | 2 | 2.54 | N | N | 0.8 | 1.75 | 1.8 | 0.7 | 5 | 7.5 | 6.1 | 90 Min | |
| Index | | L | W | H | Pitch-1 | Pitch-2 | Cap | Positioner | A | B | C | D | E | F | Working height | Froce(gf) | PDF |
|---|
| Index | | L | W | H | Pitch-1 | Pitch-2 | Cap | Positioner | A | B | C | D | E | F | Working height | Froce(gf) | PDF |
|---|
| 1 | 110519-5 | 8 | 4.6 | 2 | 2.54 | 2 | N | N | 0 | 0 | 2 | 0.4 | 2.7 | 3.8 | 3 | 80±30 | |
| 2 | 100056-5 | 8 | 4.6 | 2 | 2.54 | 2 | N | N | 0 | 0 | 2 | 0.5 | 3 | 4.3 | 3.5 | 120±30 | |
| 3 | 110396-5 | 8 | 4.6 | 2 | 2.54 | 2 | N | N | 0 | 0 | 2 | 0.5 | 3 | 4.3 | 3.5 | 65 Min | |
| 4 | 100064-5 | 8 | 4.6 | 2 | 2.54 | 2 | N | N | 0 | 0 | 1.9 | 1 | 3.5 | 5 | 4.3 | 65 Min | |
| 5 | 100338-5 | 8 | 4.6 | 2 | 2.54 | 2 | N | N | 0 | 0 | 2 | 0.5 | 3.5 | 5 | 4.2 | 45±10 | |
| 6 | 110306-5 | 8 | 4.55 | 2 | 2.54 | 2 | N | N | 0 | 0 | 2 | 0.5 | 4 | 5.5 | 4.5 | 120±20 | |
| 7 | 100711-5 | 8 | 4.6 | 2 | 2.54 | 2 | N | N | 0 | 0 | 2 | 0.5 | 4 | 6 | 5.2 | 65±20 | |
| 8 | 110379-5 | 8 | 4.6 | 2 | 2.54 | 2 | N | N | 0 | 0 | 2 | 1 | 5 | 6.5 | 5.5 | 125±30 | |
| 9 | 110459-5 | 8 | 4.6 | 2 | 2.54 | 2 | N | N | 1 | 1 | 2 | 0.5 | 6 | 8 | 6.6 | 115±30 | |
| 10 | 100099-5 | 8 | 5.2 | 2 | 2.54 | 2.6 | N | N | 0 | 0 | 1.9 | 1 | 3.5 | 5 | 4 | 95 Min | |
